How to Clean the Dodge Charger Headlight by Yourself?
Cleaning car headlights can be an easy task if you know what cleaning products to use. Several retail car care products are available, but these can be expensive and are not always effective. Instead, consider the easy use of low-cost ingredients, which are most likely already in the house. Cooking Oil
Cooking oil works to lubricate and lift dirt and debris from h4 car headlight bulbs. Use an oil-based spray or a simple bottle of vegetable oil. Rub over the headlight with a soft cloth or brush, rubbing to remove any built-in residue. The oil will restore the transparency of the high low beam h4 headlights, the removal of the fog film, cracking lubricants, and leaving headlights looking again.
Toothpaste and baking soda
A combination of toothpaste and baking soda effectively works to break down dirt and grime and leave the headlights on like new. On a plate, mix a tablespoon of toothpaste with a tablespoon of baking soda. This result will create an easy to apply paste that can use with a toothbrush or a rough sponge. Rub directly on the headlights, and rinse or clean with a damp cloth. This result will restore the clear transparency of the headlight and restore the vehicle’s headlight resource.
Nail Polish Remover
Nail polish remover also works to eliminate accumulation in headlights of cars. Be sure to use only without acetone nail polish remover, as acetone-based products can eat away in the top layer of the headlights. Polish the headlights with a sponge or brush and apply as necessary until the lights restored to their original state. Wipe with a damp cloth to remove any excess residue or nail polish remover, and the lights will look new again.
Make your headlight in a clean situation that would not absorb the light produce form the bulb. Upgrading your headlight also is another good choice. With lots of style options of LED bulbs, this can make your car personalty driving on road. You can select the lastest LED replacement kits to complete this. A LED set can help others spot your car.
The LED bulbs mainly emit 4000 lumens of brightness. But some brightness might lose within the bulb as it produces light. If you are worried about the brightness, you can make additional projectors into the housing. The projector can help to focus the light through on road.